Eagle garages tend to run big, three-car and up. $7 a square foot, all in, no matter the size.
We see a lot of oversized and third-bay garages in Eagle, plus shop space and RV bays. Bigger floors don't change the rate, they just take a little more material and a little more flake. If you've got an alcove with a water heater or a workbench you'd rather we work around, tell us up front and we'll price only the area getting coated.
Larger Eagle garages often land between 700 and 900 square feet, which is roughly $4,900 to $6,300 all in.
That covers diamond grinding, the epoxy base coat, a full flake broadcast, the polyaspartic topcoat, coated stem walls up to 8 inches, and cleanup. No separate prep fees.
The kits at the hardware store are a thin coat of paint rolled onto bare concrete, and they lift off with hot tires inside a year. We grind the slab open with a diamond grinder so the coating bonds into the concrete, then build it up in layers.
We open the concrete's pores so the coating locks in mechanically. It's the single thing that separates a floor that lasts from one that peels.
An epoxy base coat, then vinyl flake broadcast across the entire floor by hand until it's fully covered.
A clear, UV-stable wear layer over everything. Shrugs off hot tires, oil and impact, and it won't yellow.
"Very clean and professional workmanship. These guys were very informative and quick to respond. We were able to schedule this before I moved in so it was great that they were accommodating to our schedule. Would definitely recommend!"
$7 a square foot, all in. A standard two-car garage is usually 400 to 500 square feet, so roughly $2,800 to $3,500. A three-car runs 600 to 750 square feet, so about $4,200 to $5,250. Tell us how wide by how deep and we'll give you the exact number the same day.
Two days on site. Day one is grinding, prep, the epoxy base and the flake. Day two is the clear topcoat. You can walk on it after about 24 hours and park on it after 48.
No. Text us how wide by how deep the garage is and you'll have an exact number the same day. Once you're booked, our installer comes out to confirm the slab and take a moisture reading before anything starts.
No, and it comes down to prep. Those kits get rolled onto bare or acid-etched concrete and lift off. We diamond-grind the slab so the coating bonds into the concrete, not just onto it.
Yes. We coat year round, including through the Idaho winter.
Yes, completely. Our crew doesn't move belongings. If you need to keep things in there, we can coat it in halves instead, which adds to the price and stretches the job to five or six days.
Text your garage size and we'll send your number back the same day. No pressure, no site visit needed.